TrinityHighway.com
24
December 2021
STEP 4B
CAT® Post Assembly (Post 4)
PARTS
INSTRUCTIONS
F
3074B
1 EA
1.
Assemble all parts in the configuration and orientation as shown above.
2.
Ensure the tube sleeve height does not exceed 4” [100 mm] above finished
grade.
3.
Tighten threaded hardware to a snug position with a minimum of two (2) bolt
threads protruding beyond the nut.
Do not over tighten the bolt and
deform the tubes.
BB
3340G
1 EA
CC
3497G
1 EA
Use only Trinity Highway parts that
are specified herein for the CAT®
for assembling, maintaining, or
repairing the CAT®. Do not utilize
or otherwise commingle parts from
other systems even if those
systems are Trinity Highway
systems.
WARNINGS
Ensure that the post is installed per the above drawing with the three
(3) holes at the top of the post.
NOTE: When CAT® is assembled in a median, bolt
(Part CC) can be assembled from either side of the
tube sleeve. When CAT® is assembled on the
roadside, it is recommended the bolt be assembled
from the embankment side.
