Trinity Highway CAT-350, Инструкция по сборке

Страница: 31 / 52

TrinityHighway.com 30
December 2021
STEP 7A
CAT® Tail - Guardrail Assembly
Connecting To 31” [787 mm] High, 8” [200 mm]
Offset Blocks, MGS Downstream Guardrail
PARTS INSTRUCTIONS
U 3360G 48 EA Reference: Drawing SS696
1. Assemble all parts in the configuration and orientation as shown above.
2. Ensure the CAT® Tail Guardrails (Part Z) are lapped in the direction of the
adjacent traffic.
3. Ensure a Rectangular Washer (Part LL) is placed between the guardrail
bolt head (Part TT) and CAT® Tail Guardrails at Post 8.
4. Tighten all threaded hardware to a snug position with a minimum of two
(2) bolt threads protruding beyond the nut.
Z 11G 4 EA
AA 3300G 10 EA
BB 3340G 58 EA
LL 3320G 4 EA
SS 4076B 8 EA
TT 3500G 4 EA
Use only Trinity Highway parts that
are specified herein for the CAT® for
assembling,
maintaining, or
repairing the CAT®. Do not utilize or
otherwise commingle parts from
other systems even if those systems
are Trinity Highway systems.
WARNINGS
Ensure Rectangular Washers are assembled between Guardrail
Bolt head and the CAT® Tail Guardrail at Post 8. Ensure the CAT®
Tail Guardrails are lapped in the direction of the adjacent traffic.
Failure to follow this warning could result in serious injury or death
in the event of a vehicle impact with the system