BAS-SVX45F-GB
59
Configuring Tracer UC600 with Tracer TU
3. Repeat the above steps to add up to 10 events for each day of the week. Click OK to return to
the Schedules page.
To modify events on a particular day:
Select a day in the Event Table from the Add Event dialog box. Use the arrow buttons to change
the value. The new value is automatically saved.
To delete an event:
Select a day in the Event Table from the Add Event dialog box. Click the Delete button, which
removes the event from the schedule for that particular day.
Adding Exceptions to a Schedule
After you have created a schedule and have added events, you can add exceptions for holidays and
other special events. Each exception can also contain up to ten (10) of its own events. The UC600
can support up to 25 exceptions in a single schedule. However, it is not recommended to place more
than one exception on a single day.
Exceptions contain their own set of events. Exceptions can be:
•
Configured for a single date or to recur on a user-defined recurrence pattern such as the third
Thursday of the month.
•
Stacked on a single day, with the newest defined exception having the higher rank.
There are two main purposes for exceptions:
•
To override an entire day.
•
To extend or change a schedule's events over a normal daily schedule.
For a exceptions that last an entire day, you should define an exception event at midnight. The
exception then takes control of the normal daily events for the entire day.
