Toshiba e-Studio332s, Руководство оператора

Страница: 86 / 183

Configuring Fax Settings
- 86 -
z
Configuring Fax Settings
You can configure the fax settings to alter the output to suit your needs. Each setting can be configured
from the [ Fax Functions ] menu on the fax start screen.
Perform the following procedures at step 6 of "Sending a Fax" P. 83 described above.
Changing Scan Size (Scan Size)
You can select the appropriate scan size for your
document.
1
Press the to select [ Fax Functions ]
on the fax start screen and then press
.
2
Check that [ Scan Size ] is selected and
then press .
3
Press the to select a size and then
press .
4
Press the until the fax standby screen
appears.
Changing Resolution
(Resolution)
You can select an appropriate resolution to scan
your fax document to get optimum image quality.
1
Press the to select [ Fax Functions ]
on the fax standby screen and then
press .
2
Press the to select [ Resolution ] and
then press .
3
Press the to select a resolution and
then press .
Memo
z
[ Extra-Fine ] may be unavailable depending on the
recipient machine.
z
In the [ Fine ], [ Extra-Fine ], or [ Photo ] mode,
scanning takes longer.
4
Press the until the fax standby screen
appears.
Adjusting Density (Density)
You can adjust the scan density from 7 levels.
1
Press to select [ Fax Functions ] on the
fax standby screen and then press .
2
Press the to select [ Density ] and
then press .
3
Press the or to select a density and
then press .
Memo
z
[ 0 ] is the standard value. To darken the document
image, select [ +1 ], [ +2 ] or [ +3 ] (most dense).
Conversely, to lighten the document image, select
[
- 1 ], [ -2 ] or [ -3 ] (least dense).
4
Press the until the fax standby screen
appears.
Printing the Sender Name
You can set the machine to print a sender name
on faxes you send. By default, the name you
specified in [ Sender ID ] is printed.
Reference
z
For details on [ Sender ID ], refer to "Specifying Sender
Information" P. 48 .
1
Press the to select [ Fax Functions ]
on the fax standby screen and then
press .
2
Press the to select [ TTI ] and then
press .
3
Press the to select [ ON ] and then
press .
4
Press the until the fax start screen
appears.
Reference
z
For details on how to register a sender name and change
the sender name to be used, refer to the Use's Manual
Advanced.
Settable Size Values:
A4* Letter Legal 13 Legal 13.5
Legal 14
*indicates the factory default.
Settable Resolution:
Normal* Fine Extra-Fine Photo
*indicates the factory default.
OK
OK
OK
OK
OK
OK
Values:
+3 +2 +1 0* -1 -2 -3
*indicates the factory default.
OK
OK
OK
OK
OK
OK