background image

Replacing Consumable Items

- 167 -

Mai
n

te

n

ance

8

†

Align both guide posts of the image drum with 
their guide grooves on the printer, and gently 
set the image drum into the printer.

‡

Remove the toner cover (orange) from the 
image drum set in the printer by pushing the 
projection in the direction of the arrow.

Memo

z

Dispose of the toner cover as incombustible matter.

Note

z

Some toner may remain on the reverse of the toner cover. 
Take care as it may stain other parts when removed.

z

The image drum (the green cylinder) is very delicate. 
Handle it with extreme care.

z

Do not expose the image drum to direct sunlight or bright 
interior light (approximately 1,500 lux or more). When 
leaving it under normal interior light for 5 minutes or 
more, cover it with black paper.

z

Do not leave the image drum for more than 1 hour, even if 
it is covered with black paper.

3

Install a new toner cartridge.

For details, see 

"Procedure for Replacement" 

(P. 165)

.

4

Close the top cover.

Guide Post

Guide Post

Guide Grooves

Protrusion

Toner cover

Содержание e-Studio332s
























































































































































































Отзывы: