Toshiba e-Studio332s, Руководство оператора

Страница: 45 / 183

Basic Settings for Faxing (for e-STUDIO403S only)
- 45 -
Setup
1
Connecting a Telephone Line
Depending on your environment, a method to
connect the telephone line is different. Based on
the following figures, connect the line for your
environment.
Note
z
Turn off the machine when you connect the telephone line
with the machine.
z
You cannot connect to the ISDN line directly. To connect to
it, use the terminal adopter (TA) and connect to the LINE
connection of the machine.
z
Don't connect with USB cable or LAN cable at this point.
Memo
z
Depending on your environment of the machine, Checking
the reception mode, refer to
"Specifying Reception Mode"
P. 49 .
z
Checking the dial type settings, refer to "Settings for each
dialing type" P. 47 .
Connecting to the Public Line
(Connecting for Fax Only)
1
Plug one end of the [ Telephone cable ]
into the [ LINE connection ] of your
machine and the other end into a
[ Public Line (Analog) ].
Note
z
Connect telephone cable to [ LINE connection ] without
fail. Never connect it to [ TEL connection ].
Connecting to the Public Line
(Connecting for Fax and Telephone)
1
Plug one end of the [ Telephone cable ]
into the [ LINE connection ] of your
machine and the other end into a
[ Public Line (Analog) ].
2
Remove the [ Telephone connector cover ].
3
Plug the external telephone's cable into
the [ TEL connection ] of your machine.
The telephone that is connected to the machine
is called an external telephone.
Note
z
Only one telephone can be connected to this machine.
z
Don't connect the telephone to the machine in parallel. If you
connect the telephone to the machine in parallel, the following
problem will occur and the machine will not work correctly.
LINE connection
Telephone cable
Public Line
(Analog)
LINE connection
Telephone cable
Public Line
(Analog)
Telephone connector
cover
TEL connection