Toshiba e-Studio332s, Руководство оператора

Страница: 66 / 183

Configuring the Network Settings
- 66 -
7
Select [ Enter ] and then press .
8
Press the and then enter the
information in B-1.
9
Select [ Enter ] and then press .
10
Press the and then select a protocol
for receiving e-mail for the machine, and
then press .
- If you want your machine to receive e-mail from
the POP3 server, select [ POP3 ]. Proceed to step
11.
- If you want your machine to receive e-mail
without using a mail server, select [ SMTP ].
Proceed to step 13.
- If you do not want your machine to receive e-mail,
select [ Disable ]. Proceed to step 13.
11
Press the and then enter the
information in B-3.
12
Select [ Enter ] and then press .
13
Press the and then select an
authentication method based on the
information in B-4. Then, press .
- If B-4 is "Do not authenticate", select [ Do not
authenticate ]. Proceed to step 24.
- If B-4 is "SMTP", select [ SMTP Auth ]. Proceed to
step 14.
- If B-4 is "POP", select [ POP Before SMTP ].
Proceed to step 18.
14
Press the and then enter the
information in B-5.
15
Select [ Enter ] and then press .
16
Press the and then enter the
information in B-6.
17
Select [ Enter ] and then press .
Proceed to step 24.
18
Press the and then enter the
information in B-3.
19
Select [ Enter ] and then press .
20
Press the and then enter the
information in B-7.
21
Select [ Enter ] and then press .
22
Press the and then enter the
information in B-8.
23
Select [ Enter ] and then press .
24
When the setup menu screen is
displayed, press .
The setup for Scan To E-mail, Scan To Fax Server
and Internet Fax is complete.
Reference
z
For details on how to use Scan To E-mail, refer to "Scan to
E-mail" P. 105 .
z
For details on how to use Scan To Fax Server, refer to
"Basic Procedure for Scan To Fax Server" P. 94 .
z
For details on how to use Internet Fax, refer to "Basic
Procedure for Internet Faxing" P. 96 .
Setting Up Scan To Network
PC
The Scan To Network PC function enables you to
send and save scanned images to the "shared
folder" of a computer on the network. To use this
function, register your machine on the computer
as a user and create a shared folder, and then
create a profile on your machine to register the
settings for the computer.
Note
z
Before starting the setup, get permission from the network
administrator to create a shared folder on the computer by
following the procedure below.
Memo
z
The CIFS protocol is used in this procedure.
Checking the Name of the Computer
Check the name of the computer following the
procedure below, and fill in C-1 of the Setup
Information Form.
„
For Windows 7, Windows Server
2008 R2, Windows Server 2008
and Vista
1
Click [ Start ] and select [ Control
Panel ].
2
Select [ System and Security ].
For Windows Server 2008 and Windows Vista,
select [ System and Maintenance ].
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK
OK