Toshiba e-Studio332s, Руководство оператора

Страница: 162 / 183

Other Issues
- 162 -
There is an abnormal
sound. The machine is inclined. Place the machine on a flat
surface. -
There is a piece of paper or
unknown object inside the
machine. Check the inside of the machine
and remove any objects. -
The top cover is open. Close the top cover. -
There is a buzzing
sound. The machine is printing on heavy
or thin paper when the
temperature inside is high. This is not a malfunction. You can
proceed with the operation. -
It takes a while to start
printing. The machine is warming up from
the power save or sleep mode. Press the < SETTING > key and
select [ Admin Setup ] > [ User
Install ] > [ Power Save Enable ]/
[ Sleep ] and disable both modes.
P.24
The machine may be cleaning the
image drum. Wait for a while. -
The machine is adjusting the
temperature of the fuser unit. Wait for a while. -
The machine is processing data
from another interface. Wait until the process finishes. -
A print job has stopped
in the middle of the
printing process. As a result of processing print jobs
continuously, the fuser unit has
become hot. The fuser unit is
cooling off. Wait for a while.
When the fuser unit gets cooler,
printing restarts automatically. -
As a result of processing print jobs
continuously for a long time, the
temperature in the machine inside
has become too high. The machine
is cooling off. Wait for a while.
When the machine gets cooler,
printing restarts automatically. -
The specified settings
such as the time setting
have been erased. The machine was turned off for a
long time or every day. The life of the battery may have
ended. Contact your dealer. -
Memory is insufficient. You have launched Multiple
applications. Close the applications you are not
using. -
It takes a long time to
finish printing. The processing speed of the
computer may be slowing down
the print job. Use a computer with faster
processing speed. -
You have selected [ High Quality
(Multiple tones) ] on the [ Print
Job Options ] tab of the printer
driver.
Select [ Fine / Detail
(600x1200) ] or [ Normal
(600x600) ] on the [ Job
Options ] tab of the printer driver.
-
The print data is complicated. Make the data simpler. -
The printer driver is not
correctly displayed on
Mac OS X. The printer driver may not be
operating correctly. Uninstall the printer driver and
install it again. Advanced
The machine turns off
automatically. When your machine is not used for
a certain period of time (factory
default is 4 hours), the power turns
off automatically. This function is
called Auto Power Off. Press the < SETTING > key and
select [ Admin Setup ] > [ User
Install ] > [ Power Save ] > [ Auto
Power Off ] and disable the
function.
P.23
Symptom Point to check Remedy Reference