Toshiba e-Studio332s, Руководство оператора

Страница: 160 / 183

Other Issues
- 160 -
z
The paper often jams.
z
Multiple sheets are fed
at once.
z
The paper is fed at an
angle.
The machine is inclined. Place the machine on a flat surface. -
The paper is too light or too heavy. Use the appropriate paper for the
machine.
P.33
The paper is moist or has a static
charge.
Use paper stored under proper
temperature and humidity
conditions.
P.35
The paper is wrinkled, folded or
curled.
Use appropriate paper for the machine.
Fix the re-flexed paper.
P.33
Something is already printed on
the back side of the paper.
You cannot use paper that has been
printed on for tray 1 and tray 2.
Load it in the MP tray or Manual
Feeder for printing.
P.38
The edges of the paper are not
kept even.
Fan the paper and even up the
edges.
P.36
There is only one sheet of paper in
the tray.
Load several sheets of paper. P.36
You have added new paper onto
the paper already loaded in the
tray.
Remove the already loaded paper,
stack it onto the new paper, even
up the edges and load the paper
with the old paper on top.
P.36
The paper is loaded at an angle. For tray 1 and tray 2, adjust the
paper width guide and stopper to
the paper.
For the MP tray or Manual Feeder,
adjust the paper width guide to the
paper.
P.36
Envelopes are not correctly loaded. Load envelopes correctly. P.38
Paper, envelopes or labels whose
weight is between 123 and 163 g/m
2
(33 and 43 lb) is loaded on the tray 1
and tray 2.
Load the paper, envelopes or labels
whose weight is between 123 and
163 g/m
2
(33 and 43 lb) in the MP
tray (e-STUDIO403S) or Manual
Feeder (e-STUDIO332S).
P.38
P.41
Paper does not feed into
the machine.
The setting of [ Paper Feeding
Source ] on the printer driver is
not correctly specified.
Check the paper tray and select
the correct tray in [ Paper
Feeding Source ] on the printer
driver.
-
You have specified manual feeding
on the printer driver.
Load the paper in the MP tray.
Then, on the operator panel, select
[ Restart ].
Or, on the printer driver, clear the
[ Use MP tray as manual feed ]
check box on [ Paper feed options ].
P.38
Advanced
The machine does not
start processing even
though you have
removed the jammed
paper.
- Open and close the top cover. -
The paper gets folded or
wrinkled.
The paper is moist or has a static
charge.
Use paper stored under proper
temperature and humidity
conditions.
P.35
The paper is light. Press the < SETTING > key and then
select [ Paper Setup ] > [ (tray
name) ] > [ Media Weight ].
Then, specify a lighter weight.
P.40
The paper twists around
the rollers in the fuser
unit.
The settings of media weight and
type are incorrect.
Press the < SETTING > key and
then select [ Paper Setup ] >
[ (tray name) ] > [ Media Type ]/
[ Media Weight ]. Then, specify
the appropriate values.
Or, specify the heavier weight in
[ Media Weight ].
P.40
The paper is light. Use heavier paper. -
There is an image or text on the
leading edge of the paper.
Have a margin on the leading edge
of the paper.
For duplex printing, leave a margin
on the leading and bottom edges.
-
Symptom Point to check Remedy Reference