Toshiba e-Studio332s, Руководство оператора

Страница: 84 / 183

Basic Procedure for Faxing
- 84 -
Specifying a Destination
You can specify a destination in the following six
ways:
z
Using the ten-key pad
z
Using a speed dial
z
Using a group
z
Using the transmission histories
z
Using the reception histories
z
Using the one-touch key pad
Perform the following procedures at step 5 of
"Sending a Fax" P. 83 described above.
Direct Input
You can enter a destination fax number directly
by using the ten-key pad. You can enter up to 40
digits.
1
Press the to select [ Direct Input ] and
then press .
2
Enter a destination fax number using the
ten-key pad on the operator panel.
3
Select [ Enter ] and then press .
Memo
z
You can use the ten-key pad to enter a destination also on
the screen that is displayed after pressing the <
FAX/
HOOK > key. In this case, the fax start screen appears
after entering a destination.
„
Dialing Functions
You can use the following functions when
entering a destination fax number.
Select the function you want and then press on
the fax number entry screen.
z
-(Hyphen)
Inserts a hyphen to the entered fax number.
z
PreFix
Inserts a prefix number registered in advance.
"N" is inserted when entering.
z
Flash
Orders your PBX(Private Branch Exchange) to
connect you with PSTN(Public Switched
Telephone Network). When inputting, enter "F".
Enter "Pause" and "#" by pressing <#> on the
ten-key pad. When you press <#>, you toggle
between "P" and "#".
z
Pause
Pauses a few seconds when dialing. You can use
multiple pauses. "P" is inserted when entering.
z
# (Hash symbol)
When the tone dial is set, "#" sends through a
circuit. When inputting, enter "#".
Enter "Tone" and "*" by pressing <*> on the
ten-key pad. When you press <*>, you toggle
between "T" and "*".
z
Tone
Switches to tone dialing if pulse dialing is set. "T"
is inserted when entering.
z
* (Asterisk)
When the tone dial is set, "*" sends through a
circuit. When inputting, enter "*".
Reference
z
For details on prefix numbers, refer to the User's Manual
Advanced.
Using Speed Dial List and Group List
You can select a destination from numbers
registered in the speed dial list or the group list.
You must register them in advance.
Reference
z
For details on how to register numbers to Speed Dial List
and Group List, refer to
"Phone Book" P. 91 .
1
Press the to select [ Speed Dial List ]
or [ Group List ] and then press .
2
Press the to select a destination or
group and then press .
The check box is selected. You can select multiple
entries.
3
When you have selected all the
destinations, press the .
4
Check that [ Complete ] is selected and
then press .
OK
OK
OK
OK
OK