Toro Reelmaster 5510 Series, Руководство по обслуживанию

Страница: 99 / 662

Removing the Air Cleaner Assembly
1. Park machine on a level surface, lower cutting units, stop engine, engage
parking brake and remove key from the key switch. Raise and support hood.
2. Remove air cleaner components as necessary ( Figure 43 ).
3. Refer to Traction Unit Operator’s Manual for air cleaner service and
maintenance procedures.
Installing the Air Cleaner Assembly
IMPORTANT
Any leaks in the air filter system will allow dirt into engine and
will cause serious engine damage. Ensure that all air cleaner
components are in good condition and are properly secured during
assembly.
1. Assemble air cleaner system ( Figure 43 ).
g229321
Figure 44
1. Air cleaner assembly 3. Adapter
2. Indicator 4. Evacuator valve
A. If service indicator (item 6 in Figure 43 ) and adapter were removed from
air cleaner housing, apply thread sealant to adapter threads before
installing adapter and indicator to housing. Install adapter so that the
grooves in adapter hex and adapter filter element are installed toward
service indicator (
Figure 44 ). Torque the indicator to 1.4 to 1.6 N∙m (12
to 15 in-lb) .
B. Ensure that evacuator valve on air cleaner assembly is pointed down
after assembly.
Reelmaster ® 5410/5510/5610 Series Page 5–7 Kubota Gasoline Engine: Service and Repairs
15216SL Rev C