Toro Reelmaster 5510 Series, Руководство по обслуживанию

Страница: 280 / 662

Installing the Hydraulic Pump Driveshaft (continued)
4. On machines with a Yanmar diesel engine, apply medium strength
threadlocker to the threads of the flange-head screws (item 7 in Figure 148 ).
Secure the driveshaft assembly to the engine flywheel with the 8 flange-head
screws; torque the flange-head screws to
24 to 28 N∙m (17 to 21 ft-lb) in
a criss-cross pattern.
5. On machines with a Kubota gas or diesel engine, apply medium strength
threadlocker to the threads of the bolts. Secure the driveshaft assembly
to the engine flywheel; torque the bolts to
46 to 56 N∙m (34 to 42 ft-lb) in
a criss-cross pattern.
6. Slide the driveshaft yoke on the pump input shaft so that the yoke is flush
with end of the input shaft. Secure the driveshaft yoke to the pump input
shaft with the 2 bolts and 2 flange nuts.
7. On machines with a Kubota gasoline or diesel engine ( Figure 149 ), install
and secure the driveshaft guard hoop to the machine frame.
8. On machines with a Yanmar diesel engine, position the driveshaft guard
hoop and heat shield to the machine frame and secure with the 2 flange-head
screws (item 11 in
Figure 148 ) and 2 flange nuts.
9. Lubricate the grease fittings on the driveshaft.
10. Install the hood saddle onto the frame brackets. Lower and secure the hood
and operator seat.
Hydraulic System: Service and Repairs Page 6–162 Reelmaster ® 5410/5510/5610 Series
15216SL Rev C