Toro Reelmaster 5510 Series, Руководство по обслуживанию

Страница: 12 / 662

Safety Instructions
The Reelmaster machines meets or exceeds safety standard specifications
when weights are installed according to information in the
Operator’s Manual .
Although hazard control and accident prevention are partially dependent upon
the design and configuration of the machine, these factors are also dependent
upon the awareness, concern, and proper training of the personnel involved in
the operation, transport, maintenance, and storage of the machine. Improper
use or maintenance of the machine can result in injury or death.
WARNING
To reduce the potential of injury or death, comply with the following
safety instructions as well as information found in the
Operator’s
Manuals .
Supervisor’s Responsibilities
1. Ensure that the operators are fully trained and familiar with the Operator’s
Manual , Operator’s Training DVD , and all of the operating and safety decals
on the machine.
2. Establish your own special procedures and work rules for unusual operating
conditions (e.g., slopes too steep for machine operation). Survey the mowing
site completely to determine hills on which you can operate safely. When
performing this site survey, always understand and take into consideration
the turf condition and rollover risk.
Before Operating the Machine
•
Review and understand the contents of the Operator’s Manuals and
Operator’s Training DVD before starting and operating the machine. Become
familiar with the controls and know how to stop the machine and engine
quickly. Additional copies of the
Operator’s Manuals are available at
www.toro.com.
•
Keep all the shields, safety devices, and decals in place. If a shield, safety
device, or decal is illegible or damaged, repair or replace it before operating
the machine.
•
Tighten any loose nuts, bolts, or screws to ensure that the machine is in
safe operating condition.
•
Ensure that the interlock switches are adjusted correctly so that the engine
does not start unless the traction pedal is in the N
EUTRAL
position, and the
reel engage switch is in the O
FF
(disengaged) position.
•
Diesel fuel is highly flammable; handle it carefully.
– Store fuel in containers specifically designed for storing fuel.
– Do not remove the fuel tank cap of the machine while the engine is hot
or running.
– Do not smoke while handling fuel.
– Fill the fuel tank outdoors and only to the bottom of the filler neck. Do not
overfill the fuel tank.
– After refueling the machine, install the fuel tank and fuel container caps.
– If you spill fuel, do not attempt to start the engine but move the machine
away from the spill. Avoid creating any source of ignition until fuel vapors
have dissipated. Wipe up any spilled fuel.
Safety: Safety Instructions Page 1–2 Reelmaster ® 5410/5510/5610 Series
15216SL Rev C