Toro Reelmaster 5510 Series, Руководство по обслуживанию

Страница: 13 / 662

While Operating the Machine
•
Sit on the seat when starting and operating the machine.
•
Anytime you park the machine (short or long term), lower the cutting decks to
the ground.
IMPORTANT
When you lower the cutting deck to the ground, the pressure from
the hydraulic lift circuit releases and prevents the cutting deck
from accidentally lowering.
•
If you park the machine on a slope, block or chock the wheels.
Before starting the machine
DANGER
The exhaust fumes are hazardous and have the potential of injury
or death.
Do not run the engine in a confined area without adequate ventilation.
1. Set the parking brake.
2. Ensure that the traction pedal is in the N
EUTRAL
position and the reel engage
switch is in the O
FF
(disengaged) position.
3. After you start the engine, release the parking brake and keep foot off the
traction pedal. Ensure that the machine does not move.
Note: If machine movement is evident, the traction pedal linkage is adjusted
incorrectly; therefore, shut off the engine and adjust the traction pedal linkage
until the machine does not move when you release the traction pedal; refer to
the
Operator's Manual .
CAUTION
Running the engine causes the engine, radiator, and exhaust system
to become hot. Touching a hot engine, radiator, or exhaust system
can burn you.
Do not touch the engine, radiator, or exhaust system while the
engine is running or soon after you stop it.
Before stopping the machine
1. Ensure that the traction pedal is in the N
EUTRAL
position.
2. Lower and disengage the cutting decks and wait for all moving parts to stop.
3. Set the parking brake.
4. Shut off the engine and remove the key from the key switch.
Reelmaster ® 5410/5510/5610 Series Page 1–3 Safety: Safety Instructions
15216SL Rev C