6-35
6 SPECIAL MODE (Menu Mode)
6.6.6 Setout Road
To setout the road, carry out the following operating procedure.
Operating procedure
Operation
Display
1
After pressing the
{MENU}
key, press the
{F4}
(P
↓
),
{F2}
,
{F4}
key to get the programs menu on page 2/
2.
{MENU}
{F4}
{F2}
{F4}
2
Press the
{F3}
,
{F2}
,
{F2}
key.
(
Refer to “Set out road” on page 6-26.)
{F3}
{F2}
{F2}
3
Input data.
Input
data
4
Press the
{ENT}
key.
{ENT}
5
Select offset.
(Example: RIGHT)
Press the
{F2}
key. *1)
{F2}
6
Input the offset value.
7
Press the
{ENT}
key.
The setout point coordinates are displayed.
Input
offset value
{ENT}
8
Press the
{F3}
(YES) key.
The distance to the setout point and the backsight
are displayed.
HR: Calculated horizontal angle of the layout point
HD: Calculated horizontal distance from the
instrument to the layout point
{F3}
9
Press the
{F1}
(ANG) key.
CHAIN: Layout point
HR: Measured (Actual) horizontal angle.
dHR: Horizontal angle to be turned to the layout
point = Actual horizontal angle - Calculated
horizontal angle.
Correct direction when dHR = 0°00'00"
{F1}
10
Press the
{F1}
(DIST) key.
HD: Measuring (Actual) horizontal distance
dHD: Horizontal distance to be turned to the
layout point = Actual horizontal distance –
Calculated horizontal distance.
{F1}
PROGRAMS 2/2
F1:AREA
F2:POINT TO LINE
F3:ROAD P
↓
SETOUT ROAD
CHAIN=
--- --- [CLR] [ENT]
SETOUT ROAD
CHAIN=1200
--- --- [CLR] [ENT]
CHAIN:1200
> CENTER
LEFT RIGHT --- ENTER
CHAIN:1200
: RIGHT
= m
--- --- [CLR][ENT]
CHAIN:1200
N : 0.000 m
E : 0.000 m
>OK ? [YES][NO]
CALCULATED
HR= 60°00’00”
HD= 100.000 m
ANGLE DIST --- ---
CHAIN:1200
HR: 60°00’00”
dHR: 0°00’00”
DIST --- NEZ ---
HD* 100.000 m
dHD: 0.000 m
MODE NEZ NP/P NEXT
