3-3
3 ANGLE MEASUREMENT
3.3.2 Setting a Horizontal Angle from the Keys
Make sure the mode is Angle measurement.
3.4 Vertical Angle Percent Grade(%) Mode
Make sure the mode is Angle measurement.
Operating procedure
Operation
Display
1
Collimate the target.
Collimate
2
Press the
{F3}
(HSET) key.
{F3}
3
Input the required horizontal angle by
using keys. *1)
For example:70°40'20"
When completed, normal measuring from the
required Horizontal angle is possible.
70.4020
{F4}
*1) To enter Alphanumeric characters, see Section 2.4 “How to Enter Alphanumeric Characters”.
Operating procedure
Operation
Display
1
Press the
{F4}
(
↓
) key to get the function on page
2.
{F4}
2
Press the
{F3}
(V%) key. *1)
{F3}
*1) Every time pressing the
{F3}
(V%) key, the display mode switches.
When the measurement is carried out over ±45° (±100%) from the horizontal, the display shows
<OVER>.
V :
90°10'20"
HR:
170°30'20"
0SET HOLD HSET
P1
↓
H ANGLE SET
HR=
--- --- [CLR] [ENT]
V :
90°10'20"
HR:
70°40'20"
0SET HOLD HSET
P1
↓
V :
90°10'20"
HR:
70°40'20"
0SET HOLD HSET
P1
↓
TILT REP V%
P2
↓
V :
-0.30
%
HR:
170°30'20"
TILT REP V%
P2
↓
