manualshive.com logo in svg

Topcon ES-62, Инструкция по эксплуатации, Страница: 2 / 216

Поделиться
Скачать
Topcon ES-62 Скачать руководство пользователя страница 2

i

HOW TO READ THIS MANUAL

Thank you for selecting the ES-62/65.

• Please read this Operator's manual carefully, before using this product.
• ES has a function to output data to a connected host computer. Command operations from a host computer 

can also be performed. For details, refer to "Communication manual" and ask your local dealer.

• The specifications and general appearance of the instrument are subject to change without prior notice and 

without obligation by TOPCON CORPORATION and may differ from those appearing in this manual.

• The content of this manual is subject to change without notice.
• Some of the diagrams shown in this manual may be simplified for easier understanding.
• Always keep this manual in a convenient location and read it when necessary.
• This manual is protected by copyright and all rights are reserved by TOPCON CORPORATION.
• Except as permitted by Copyright law, this manual may not be copied, and no part of this manual may be 

reproduced in any form or by any means. 

• This manual may not be modified, adapted or otherwise used for the production of derivative works.

Symbols

The following conventions are used in this manual.

: Indicates precautions and important items which should be read before operations.

: Indicates the chapter title to refer to for additional information.

: Indicates supplementary explanation.

Notes regarding manual style

• Except where stated, “ES” means ES-62/65.
• Screens and illustrations appearing in this manual are of ES-62.
• Learn basic key operations in “BASIC OPERATION”  before you read each measurement procedure.
• For selecting options and inputting figures, see “Basic Key Operation” .
• Measurement procedures are based on continuous measurement. Some information about procedures 

when other measurement options are selected can be found in “Note” (

).

•

Bluetooth

®

 is a registered trademark of Bluetooth SIG, Inc.

• KODAK is a registered trademark of Eastman Kodak Company.
• All other company and product names featured in this manual are trademarks or registered trademarks of 

each respective organization.

  

Li-ion

S Li-ion

:This is the mark of the Japan Surveying Instruments Manufacturers Association.

Содержание ES-62

























































































































































































































Отзывы:

Нет отзывов