6-9
6 SPECIAL MODE (Menu Mode)
2) Z Coordinate Calculation from Known Point Measuring Data
[Example setting] Using coordinate data file
Operating procedure
Operation
Display
1
After pressing
{MENU}
key, press
{F4}
(P
↓
) key to
get the menu on page 2.
{MENU}
{F4}
2
Press the
{F2}
key.
{F2}
3
Press the
{F3}
(Z COORD.) key.
{F3}
4
Press the
{F1}
(USE FILE) key.
5
Press the
{F1}
(INPUT) key and enter the File
Name.
{F1}
{F1}
Enter FN
{F4}
6
Press the
{F2}
key.
{F2}
7
Press the
{F1}
(INPUT) key and enter the Point
Number in coordinate data file.
{F1}
Enter PT#
{F4}
8
Press the
{F3}
(YES) key and enter the Point
Number in coordinate data file.
{F3}
9
Enter the height.
Enter R. HT
{F4}
10
Collimate a prism on the point and press the
{F1}
(MEAS) key.
Measuring starts. *1)
Collimate P
{F1}
MENU 2/4
F1:MEMORY MGR.
F2:PROGRAMS
F3:GRID FACTOR P
↓
PROGRAMS 1/2
F1:REM
F2:MLM
F3:Z COORD. P
↓
Z COORD.SETTING
F1:USE FILE
F2:DON’T USE
SELECT A FILE
FN:_________
INPUT LIST ––– ENTER
Z COORD.SETTING
F1:OCC.PT INPUT
F2:REF.MEAS
NOO1#
PT#:_________
INPUT LIST NEZ ENTER
N: 4.356 m
E: 16.283 m
Z: 1.553 m
>OK ? [YES][NO]
REFLECTOR HEIGHT
INPUT
R.HT
=0.000 m
--- --- [CLR] [ENT]
REFLECTOR HEIGHT
INPUT
R.HT : 0.000
m
MEAS ––– NP/P –––
HR: 120°30'40"
HD*[n] << m
VD: m
>Measuring...
