TLV SC-F71, Инструкция по эксплуатации

Страница: 53 / 390

172-65710M-04 (SC-F71 Parameters/Functions) 23 Dec 2021
52
3.8.8 Setting group No. 54: Input 2_Tuning (
2.TUNE
)
No. Symbol Name Data range
Factory set
value
User set
value

Sn54
Setting group No. 54 This is the first parameter symbol of
Setting group No. 54
 
111
2. ATb
Input 2_AT bias
1)
-(Input 2_Input span) to +(Input 2_Input
span)
[Varies with the setting of the Decimal
point position.]
0
112
2.ATTM
Input 2_AT remaining
time monitor
1)
0 hours 00 minutes to 48 hours 00 minutes
 
113
2.TUNE
Input 2_AT/ST status
monitor
1)
0: AT/ST complete
1: AT running now
2: ST running now
-1: Aborted. Setting changed.
-2: Aborted. Abnormal input.
-3: Aborted. Timeout.
-4: Aborted. Abnormal calculated values.
 
1)
Displayed when "2-loop control/Differential temperature control" or "Cascade control" is selected in "Select function for Input 2" AND
a setting other than "Pressure control operation [MC-(V)COS(R)]" is selected in "Input 2_Control action".
2)
Displayed when "2-loop control/Differential temperature control" is selected in "Select function for Input 2" AND "Pressure control
operation [MC-(V)COS(R)]" is not selected in "Input 2_Control action".
3.8.9 Setting group No. 57: Proactive (
PACT
)
No. Symbol Name Data range
Factory set
value
User set
value

Sn57
Setting group No. 57
1)
This is the first parameter symbol of
Setting group No. 57
 
114
FFST
FF amount learning
2)
0 to 3
0: No learning
+1: Learn Input 1
+2: Learn Input 2
To select two or more functions, sum
each value.
0
115
1.EXDJ
Input 1_Determination
point of external
disturbance
3)

(Input 1_Input span) to +(Input 1_Input
span)
(When Control with PV select:

(PV select input span) to

(PV select
input span))
[Varies with the setting of the Decimal
point position.]

1
116
2.EXDJ
Input 2_Determination
point of external
disturbance
4)
-(Input 2_Input span) to +(Input 2_Input
span)
[Varies with the setting of the Decimal
point position.]

1
1)
Displayed when a setting other than "Pressure control operation [MC-(V)COS(R)]" is selected in "Input 1_Control action" or "Input
2_Control action".
2)
Displayed when "Bottom suppression function" is available AND a setting other than "Pressure control operation [MC-(V)COS(R)]" is
selected in "Input 2_Control action", OR "2-loop control/Differential temperature control" is selected AND a setting other than
"Pressure control operation [MC-(V)COS(R)]" is selected in "Input 2_Control action".
3)
Not displayed when "Pressure control operation [MC-(V)COS(R)]" is selected in "Input 1_Control action".
4)
Displayed when "2-loop control/Differential temperature control" or "Cascade control" is selected in "Select function for Input 2" AND
a setting other than "Pressure control operation [MC-(V)COS(R)]" is selected in "Input 2_Control action".
3.8.10 Setting group No. 58: 2-input function (
2PV
)
No. Symbol Name Data range
Factory set
value
User set
value

Sn58
Setting group No. 58
1) 2) 3)
This is the first parameter symbol of
Setting group No. 58
 
117
MAS.P
Cascade_Proportional
band (master-side)
1) 3)
TC/RTD inputs:
1 (0.1, 0.01) to Input 1_Input span
(Unit:

C [

F])
[Varies with the setting of the Decimal
point position.]
Voltage (V)/Current (I) inputs:
0.1 to 1000.0% of Input 1_Input span
TC/RTD
inputs: 30
V/I inputs:
3.0
118
MAS.I
Cascade_Integral time
(master-side)
1) 3)
1 to 3600 seconds, 0.1 to 3600.0
seconds or 0.01 to 360.00 seconds
[Varies with the setting of the Integral/
Derivative time decimal point position.] 240