TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 63 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 63
7. MAINTENANCE
▪
Always carry out maintenance operations with machine at a standstill position and after having
removed the key from the control panel with the platform in rest position.
▪
The maintenance operations described below refer to a machine with ordinary working use. In case
of difficult conditions of use (extreme temperatures, corrosive environments, etc.) or following long
machine inactivity, it will be necessary to contact the AIRO assistance service to change the
intervention schedule.
▪
Repairs and maintenance operations are to be carried out by trained and authorised personnel only.
All maintenance operations should be carried out in compliance with the current work safety
regulations (work places, personal protection equipment, etc...).
▪
Carry out only the maintenance and adjustment operations described in this user manual. In
emergency situations (e.g. breakdown, wheels replacement) contact Our Technical Support.
▪ During interventions, check that the machine is completely locked. Before carrying out maintenance
operations inside the lifting structure, check that this is off-line in order to avoid accidental lowering
of the booms.
▪
Remove the battery cables and provide batteries with a suitable protection during welding
operations.
▪ Carry out maintenance operations on the heat engine only when it is not running and sufficiently
cool (except for those operations, such as oil change, which must be performed when the motor is
hot). Risk of burns in contact with hot parts.
▪
Do not use petrol or other flammable materials to clean the heat engine.
▪
For maintenance operations on the heat engine, read the manufacturer's manual of the motor
supplied on machine purchase.
▪
In case of replacement, use original spare parts only or spare parts approved by the manufacturer.
▪
Disconnect the 230V AC and/or 380V AC sockets, if any.
▪ The lubricants, hydraulic oils, electrolytes and all detergent products should be handled with care
and disposed of in safety according to the current regulations. A prolonged contact with the skin
may cause irritations and dermatosis; wash with water and soap and rinse thoroughly. Contact with
eyes, especially with electrolytes, is also dangerous; rinse with water thoroughly and call the doctor.
WARNING!
NEVER MODIFY OR TAMPER WITH MACHINE PARTS TO IMPROVE THE MACHINE PERFORMANCE AS
THIS MAY AFFECT ITS SAFE OPERATION.
7.1. Machine cleaning
To clean the machine use non-pressurized water jets after properly protecting the following parts:
▪
the control panel (both platform and ground).
▪ the electric ground control unit and all electric boxes in general;
▪ the electric motors.
Do not use pressurized water jets (high-pressure cleaners) to clean the machine.
After washing the machine, always:
▪ Dry the machine.
▪ Check integrity of plates and stickers.
▪
Lubricate the articulated joints equipped with greaser.