TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 61 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 61
▪ Through a lift truck of a suitable capacity (see machine weight in table “Technical features” a t the beginning of this
manual) equipped with forks having at least the same length as the machine width . Insert the forks as indicated by the
stickers on the machine. Should these stickers be not available, DO NOT lift the machine by means of a lift truck.
Lifting the machine by means of a lift truck is a dangerous operation, which must be carried out by qualified operators
only.
After placing the machine onto the carrying vehicle, fasten it by means of the same holes used for
lifting. To avoid breaking the platform overload controller, thus causing the machine to stop, DO
NOT fix the machine to the vehicle base by tying the platform (any model) or the last lifting boom.
Lock the turret by means of the mechanical safety lock device as specified in the previous
chapters.
Before carrying the machine check the stability grade. The platform must be fully lowered and the
platform extension must be in retracted position to ensure adequate stability during the entire
operation.