TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 53 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 53
5.4.2. Starting the 230V single-phase electric pump (OPTIONAL)
Diesel-powered models can be equipped, on request, with a
230V electric pump.
To start the electric pump:
1)
Insert the 230 V plug of the power cable into the socket
( A ).
2) Set the switch ( B ) shown in figure to ON position.
3) To start the electric pump with the platform controls:
▪
Select the on-platform control panel by means of the
locking key switch located on the electric control unit
on the chassis.
▪
Unlock the push-button ( R ) turning by a ¼ of turn
clockwise.
▪
Set the power selector ( M ) at platform to "Electric"
position.
▪ Set the power selector at platform (if any) to "230V"
position.
▪
Operate the machine.
NOTE The operations carried out with 230V electric pump
are slightly slower than those with diesel engine.
Fig. 10
WARNING!! Always check the position of the power cord during the movements.
The platform with 230V power can be operated only from the platform.
Disconnect all electric power supplies before opening the boxes.