TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 49 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 49
A) ON-OFF key and ground/platform control panel selector
B) Emergency STOP button
C) Selector for Diesel power for work or electric power.
D) He
at engine start button (models “D” and “ED”)
E) User interface display
F) Battery charger warning light (
models “E” and “ED”)
G) Powered-on machine warning light
H) Alternator warnin
g light (models “D” and “ED”)
L) Oil warning light (models “D” and “ED”)
M Air filter warning light (models “D” and “ED”)
N) Motor head temperature warning light (models “D” and “ED”)
O) PANTOGRAPH LIFTING/LOWERING lever
P) BOOM LIFTING/LOWERING lever
Q) JIB LIFTING/LOWERING lever
R) TELESCOPIC BOOM OUT/IN lever
S) TURRET ROTATION lever
T) PLATFORM ROTATION lever
U) PLATFORM LEVEL compensation lever
5.2.1. On-off key and control panel selector (A)
The on-off key located on the ground control panel is used to:
▪
turn ON the machine by selecting one of the two control panels:
o
Platform controls enabled with locking key switch set to “platform” symbol. Stable key position with possibility
to extract the key.
o
Ground control panel enabled (for emergency operations) with locking key switch set to "turret" symbol.
Position with action to be kept. When the key is released the machine is turned off.
▪ Turn OFF the control circuits by turning it to OFF.
5.2.2. Emergency stop button (B)
By pressing this button the machine (as well as the heat engine on models "D", "ED" and "EB") is completely stopped; by
rotating it of 1/4 turn (clockwise) the machine can be turned ON by means of the ON-OFF key.
5.2.3. Diesel/electric drive power selector (C)
Holding the ON-OFF key in position “ground control panel” it is possible to select the type of power for the ground controls:
▪
If ELECTRIC is selected and the on/off key is kept active in position “ground control panel” the 12V electric pump is started
for the emergency controls or the 48V electric pump for “ED” models.
▪
If DIESEL is selected and the ON-OFF key is kept active in position “ground control panel” the Diesel engine can be
started.
5.2.4. Heat engine start button (D)
Holding the ON-
OFF key in position “ground control panel” after sele cting the DIESEL power, the diesel engine can be started
by means of the relevant switch.
▪ In “0” position the Diesel engine is off.
▪
In “3 sec” position the plugs pre -heating takes place (only for engines with plugs).
▪
In “Start” position th e motor starts.