TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 43 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 43
5.1.3. Other functions of the platform control panel
5.1.3.1. Selection of electric/thermic propulsion (OPTIONAL)
On some models it is possible to select the type of drive using the selector
M . Set it to position Electric to use the electric
propulsion (12V battery or 48V for E/D models, for emergency boom operations or 380V three-phase / 230V single-phase for
boom work operations - OPTIONAL); set it to position
Diesel to use the thermic drive power.
5.1.3.2. Electrical pump start button 12V (Battery) or 230V/380V three-phase mains (power
mains) - (OPTIONAL)
The button O starts:
▪ the 12V electric pump for emergency operations (excluding drive and steering).
▪ The 230V single-phase electric pump for platform movement (excepting drive and steering) and the ground electric
panel is connected to three-phase electric mains.
▪
The 380V three-phase electric pump for platform movement (excepting drive and steering) and the ground control
panel is connected to three-phase electric mains.
See next paragraphs for operations modes of the start button of the electrical pump.
5.1.3.3. He at engine start button (“ED”, “D” models)
It starts the heat engine (Diesel) on dual-
powered models (“ED”) and on thermal - powered models (“D”).
With selector O in position Diesel operating the switch Q :
▪
In START position it enables starting.
▪
In position 3 sec it pre-heats the plugs (motors with plugs only).
▪
In position 0 it stops the heat engine.
5.1.3.4. Manual horn
The horn warns that the machine is moving. It is operated by means of button
S .
5.1.3.5. Emergency stop
By pressing the red emergency STOP
R button all control functions are stopped. Normal functions are enabled by rotating the
button of 1/4 turn clockwise.
WARNING! The power by the 12V emergency electrical pump is only for platform lowering in case of faults
in the main powers. Do not use it during normal work operations.