TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 67 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 67
7.2.3. Hydraulic circuit oil level check and change
Check after the first 10 working hours and, afterwards, at
least once a month the level by means of the provided
cap ( A ) equipped with a dipstick; always make sure that
the level lies between the max. and min. values. If
necessary, top up until max. level is reached. The oil
check should be carried out when platform is completely
lowered and telescopic boom in.
Completely change the hydraulic oil at least every two
years.
To empty the tank:
▪
Lower the platform completely and retract the
telescopic boom extension.
▪
stop the machine by pressing the emergency
stop button of the ground control panel.
▪ Place a container under cap ( B ), under the tank,
and unscrew it.
Fig. 20
Use only the types of oil and quantity indicated in the table below.
HYDRAULIC SYSTEM OIL
BRAND
TYPE
-20°C +79°C
TYPE
-30°C +48°C
REQUIRED QUANTITY
A16 JRTD A16 JED A16 JE
A18 JRTD A18 JED A18 JE
SYNTHETIC OILS
105 Litres
ESSO Invarol EP46 Invarol EP22
AGIP Arnica 46 Arnica 22
ELF Hydrelf DS46 Hydrelf DS22
SHELL Tellus SX46 Tellus SX22
BP Energol SHF46 Energol SHF22
TEXACO Rando NDZ46 Rando NDZ22
Q8 LI HVI 46 LI HVI 22
PETRONAS HIDROBAK 46 HV HIDROBAK 22 HV
BIODEGRADABLE OILS - OPTIONAL
PANOLIN HLP SINTH E46 HLP SINTH E22
Do not dispose of used oil in the environment. Comply with the current local standards.
The lubricants, hydraulic oils, electrolytes and all detergent products should be handled with care and disposed of in safety
according to the current regulations. A prolonged contact with the skin may cause irritations and dermatosis; wash with water
and soap and rinse thoroughly. Contact with eyes, especially with electrolytes, is also dangerous; rinse with water thoroughly
and call the doctor.