TIGIEFFE AIRO A Series, Руководство по эксплуатации и обслуживанию

Страница: 39 / 130

Use and Maintenance Manual – A16 J A18 J Series Page 39
O) Starting button, electric pump 12V DC (Battery) or electric pump (220V or 380V AC) (OPTIONAL)
Q) Diesel engine start button
R) Emergency STOP button
S) Manual horn
T) Drive speed selector
V) Right steering switch
Z) Left steering switch
ZA) Enabled control panel warning light
ZB) Flat battery red warning light (models - E)
ZC) Diesel engine fault / low fuel level warning light (models -D)
ZD) Danger warning light
ZE) Overload warning light
ZF) Dead-man pedal
ZG) Differential locking button (OPTIONAL)
All movements (except for platform rotation and platform level compensation) are controlled by proportional joystick /levers; it is
therefore possible to adjust movement speed by means of the relative controls. To avoid sudden shakes during movements, it
is advisable to operate the proportional joystick controls gradually.
For safety reasons, to operate th e machine, it is necessary to press the “dead - man” ZF pedal on the platform. If the “dead - man”
pedal is accidentally released while the machine is operating, the movement is immediately stopped.
WARNING!
Holding down the “dead - man” peda l for over 10 seconds without carrying out any operation will disable
the control panel.
The disabled control panel condition is indicated by the flashing green led (ZA). To operate the machine
again it is necessary to release the “dead - man” pedal and pres s it again; the green led (ZA) will light up
steady and for the next 10 seconds all controls will be enabled.