TigerStop TigerSaw 1000, Руководство по установке

Страница: 33 / 68

30
1.Start at the Ready Screen. Press the [Show] soft key to display
more options.
2.Press the [Menu] soft key to access the menu select screen.
3.Enter the password and press [=].
Note: The default password is set to the serial number of the TigerStop.
TigerStop will take you to the menu select screen.
4.At the menu select screen, press the [Setup] soft key to access the
Setup menu.
5.Press the button 3 times.
To run the Find Limit routine...
1. Ensure TigerStop can move its entire travel without obstruction.
2. Press [Start] to start the routine.
Note: TigerStop will now move all the way to its maximum and minimum limits. Ensure the deck is clear.
3. When the routine has finished, TigerStop will take you back to the setup menu.
Calibrate TigerStop
Calibration sets the distance the TigerStop pusher foot is from the saw blade.
1.At the menu select screen, press the [Setup] soft key to access the
Setup menu.
2.You will be taken to the Calibrate setting.
To calibrate TigerStop...
1. Cut a sample piece and measure it carefully.
2. Enter the length of the sample piece.
3. Press the [Done] soft key to save the parameter.
Set the Kerf
Kerf sets the thickness of the saw blade. This parameter is important when using the TigerSaw
1000 crayon marking system.