ThermoFisher Scientific Vanquish VC-D11, Руководство по эксплуатации, Страница: 74 / 192

5 • Installation
Page 74 Diode Array/Multiple-Wavelength Detectors (VC-D11, VC-D12, VF-D11)
Operating Manual
Resolving Leakage of Viper Fittings with Knurls
1. Tighten the connection a little more.
2. If leakage continues, remove the capillary.
3. Clean the capillary ends carefully by using a lint-free tissue wetted
with isopropanol.
4. Reinstall the capillary.
5. If the connection continues to leak, install a new Viper capillary.
5.8.5 Flow Connections to the Flow Cell
In addition, observe the guidelines for proper connection of the flow cell
in
General Information and Guidelines ( } page 67) .
Parts required
• Inlet capillary
• Detector waste line
For instructions on connecting the waste line, follow the steps in
Connecting the Detector Waste Line ( } page 76) .
Tools required
For the detector waste line: Tubing cutter (optional)
Preparations
1. Flush the system modules and capillaries upstream of the device to
waste before you connect the flow cell to the system flow path.
Refer to the
Vanquish System Operating Manual .
2. On the flow cell, remove the plugs from the flow cell inlet and
outlet.
TIP Store the plugs of the flow cell, for example in the flow cell
packaging, to have them easily available when storing or shipping the
flow cell.
3. Install the partition panel plugs (if not present yet). See Installing the
Partition Panel Plugs (
}
page 70) .