ThermoFisher Scientific Vanquish VC-D11, Руководство по эксплуатации, Страница: 111 / 192

6 • Operation
Diode Array/Multiple-Wavelength Detectors (VC-D11, VC-D12, VF-D11)
Operating Manual Page 111
NOTICE
Residual samples, impurities from the column or buffers with high salt
concentrations can deposit in the flow cell. This can lead to damage of
the flow cell. In addition, solvents containing acid can damage the flow
cell.
• Always flush the flow cell with an appropriate solvent before
interrupting operation.
• Fill the flow cell with pure isopropanol using the flushing and
injection kit.
• The flow cell should not be filled with pure water to avoid the
growth of algae. If you want to fill the flow cell with water, you need
to add 10% HPLC-grade isopropanol.
7. Turn off the pump flow to the device. Wait until the system pressure
is down to zero before you continue the shutdown of the device.
8. Disconnect the capillaries from the flow cell inlet and outlet.
9. After removing the flow connections, protect the flow cell inlet and
outlet ports with the plugs supplied with the flow cell. Protect the
inlet capillaries with caps.
10. The step depends as follows:
Situation Steps
Device and all other system modules
remain in the system stack and are to be
turned off Turn off the system with the system
power button on the system base.
Device shall be transported or shipped
after shutdown If one of the modules shall be removed
from the system stack, turn off
all
system modules with their main power
switch. Pressing the system power
button will not be sufficient to turn off
the power to the devices completely.
Follow the instructions in Transporting or
Shipping the Device ( } page 148) .
See also
2 Connecting the Inlet Capillary ( } page 75)
2 Connecting the Detector Waste Line ( } page 76)