Themis TA64, Руководство по оборудованию

Страница: 65 / 164

4-7
Themis Computer
4—Universe II Description
VMEbus Interface
4.2.4.2 Register Access at Power Up
Register access at power up is used in a system where either the Universe II is inde-
pendent of the local CPU or a CPU is not present. Since the Universe II and the
Turion64 are present on the TA64, register access at power up is not supported.
4.2.5 Universe II’s Hardware Power-Up Options
The Universe II power up options are determined right after the PWRRST* based on
the level of VMEbus Address VA[31..1] and VMEbus Data VD[31..27]. See
Table
4-3 , page 4-8, for the Universe II’s power up options on the TA64.
The Universe II is automatically configured at power up to operate in the default
configuration listed in
Table 4-2 . It should be noted that all power up options are
latched only at the positive edge of PWRRST*; they are loaded when SYSRST*,
PWRRST*, and RST* are negated.
Table 4-2. Universe II Power Up Options
Option Register Field Default Pins
VMEbus Register Access
Slave Image
VRAI_CTL
EN Disabled VA[31]
VAS A16 VA[30..29]
VRAI_BS BS 0x00 VA[28..21]
VMEbus CR/CSR Slave
Image
VCSR_CTL LAS[0]
a
Memory VA[20]
VCSR_TO TO 0x00 VA[19..15]
Auto-ID
MISC_STAT DY4AUTO Disabled VD[30]
MISC_CTL V64AUTO Disabled
VD[29]
VINT_EN SW_INT 0
VINT_STAT SW_INT 0
VINT_MAP1 SW_INT 000
BI-Mod MISC_CTL BI Disabled VD[28]
AUTO_SYSCON Detect MISC_CTL SYSCON Enabled VBG3IN*
SYSFAIL* Assertion
VCSR_SET SYSFAIL Asserted VD[27]
VCSR_CLR SYSFAIL -- --