Themis TA64 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 164

Themis TA64 Скачать руководство пользователя страница 24

TA64 Hardware Manual

xxiv

Themis Computer

Product Warranty and Registration

Please review the Themis Computer warranty and complete the product registration
card delivered with your TA64 board(s). Return of the registration card is not
required to activate your product warranty but, by registering your TA64, Themis
Computer will be better able to provide you with timely information updates and
product-enhancement notifications.

Our Customer Support department is committed to providing the best product sup-
port in the computer industry. Customer support is available 8am—5pm (PST),
Monday through Friday, via telephone, fax, e-mail, and our website.

Themis Customer Support

:

Telephone:

+1 510-252-0870

Fax:

+1 510-490-5529

E-mail:

[email protected]

Website:

http://www.themis.com

In Case Of Difficulties

If the TA64 does not behave as described or if you encounter difficulties installing or
configuring the board, please call Themis Computer technical support at +1 (510)
252-0870, fax your questions to +1 (510) 490-5529, or e-mail to

support@the-

mis.com.

You can also contact us via our web site:

http://www.themis.com

.

Your Comments are Welcome

We are interested in improving our documentation and welcome your comments and
suggestions. You can email your comments to us at

[email protected]

.

Please include the document part number (110102-022) in the subject line of your
email.

«
...
22
23
24
25
26
...
»

Содержание TA64





































































































































































Отзывы:

Нет отзывов