TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 90 / 229

77
3.
Use the arrow keys and scroll
wheel or number pad to enter the
frequency.
0 /
3 2 1
4
7 8
5
9
6
4.
Press F1~F5 to select the
frequency unit.
uHz
F1
~
MHz
F5
Range Frequency 1uHz~25MHz
Freqency
– Ramp
1uHz~1MHz
Default 1kHz
Note Waveform frequency and burst period are not the same.
The burst period is the time between the bursts in
N-Cycle mode.
4-7-4. Burst Cycle/Burst Count
The burst cycle (burst count) is used to define the number of cycles that are output
for a burst waveform. Burst cycle is only used with N-cycle mode (internal, external
or manual source). The default burst cycle is 1.
Panel Operation
1.
Press the Burst key.
Burst
2.
Press F1 (N Cycle).
N Cycle F1
3.
Press F1 (Cycles).
Cycles
F1
4.
The Cycles parameter will become highlighted in the
Waveform Display area.