TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 211 / 229

198
8-21. Error Messages
The FGX-2220 has a number of specific error codes. Use the SYSTem:ERRor
command to recall the error codes. For more information regarding the error
queue.
8-21-1.Command Error Codes
-101 Invalid character
An invalid character was used in the command string. Example:
#, $, %.
SOURce1:AM:DEPTh MIN%
-102 Syntax error
Invalid syntax was used in the command string. Example: An
unexpected character may have been encountered, like an
unexpected space.
SOURce1:APPL:SQUare , 1
-103 Invalid separator
An invalid separator was used in the command string. Example:
a space, comma or colon was incorrectly used.
APPL:SIN 1 1000 OR SOURce1:APPL:SQUare
-108 Parameter not allowed
The command received more parameters than were expected.
Example: An extra (not needed) parameter was added to a
command
SOURce1:APPL? 10
-109 Missing parameter
The command received less parameters than expected.
Example: A required parameter was omitted.
SOURce1:APPL:SQUare .
-112 Program mnemonic too long
A command header contains more than 12 characters:
OUTP:SYNCHRONIZATION ON
-113 Undefined header
An undefined header was encountered. The header is
syntactically correct. Example: the header contains a character
mistake.
SOUR1:AMM:DEPT MIN
-123 Exponent too large
Numeric exponent exceeds 32,000. Example:
SOURce[1|2]:BURSt:NCYCles 1E34000
-124 Too many digits
The mantissa (excluding leading 0’s) contains more than 255
digits.
-128 Numeric data not allowed
An unexpected numeric character was received in the
command. Example: a numeric parameter is used instead of a
character string.
SOURce1:BURSt:MODE 123