TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 142 / 229

129
<frequency>
<peak deviation
in Hz>
<rate in Hz>
NRf+ type including
frequency unit
suffixes. 1 KHZ, 1.0 HZ,
ΜHZ
<amplitude> NRf+ type including
voltage peak to
peak. VPP
<offset> NRf+ type including
volt unit suffixes. V
<seconds> NRf+ type including
time unit suffixes. NS, S MS US
<percent>
<depth in
percent> NRf type N/A
Message
terminators LF CR line feed code (new line) and carriage
return.
LF line feed code (new line)
EOI IEEE-488 EOI (End-Or-Identify)
Note
^j or ^m should be used when using a terminal program.
Command
Separators Space A space is used to separate a
parameter from a keyword/command
header.
Colon (:) A colon is used to separate keywords
on each node.
Semicolon (;) A semi colon is used to separate
subcommands that have the same
node level.
For example:
SOURce[1|2]:DCOffset?
SOURce[1|2]:OUTPut?
→
SOURce1:DCOffset?;OUTPut?
Colon +
Semicolon (:;) A colon and semicolon can be used to
combine commands from different
node levels.
For example:
SOURce1:PM:SOURce?
SOURce:PULSe:WIDTh?
→
SOURce1:PM:SOURce?:;SOURc
e:PULSe:WIDTh?