TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 155 / 229

142
8-6-6. SOURce[1|2]:APPLy:USER
Set
Description Outputs an arbitrary waveform from the selected channel. The
output is that specified from the FUNC:USER command.
Note Frequency and amplitude cannot be used with the DC
function; however a value (or DEFault) must be specified. The
values are remembered for the next function used.
Syntax SOURce[1|2]:APPLy:USER [<frequency> [,<amplitude>
[,<offset>] ]]
Parameter <frequency> 1
μHz~60MHz
<amplitude> 1mVpp~10Vpp
(50Ω)
<offset> -4.99V~4.99
V (50Ω)
Example SOUR1:APPL:USER
8-6-7. SOURce[1|2]:APPLy?
Query
Description Outputs a string with the current settings.
Note The string can be passed back appended to the Apply
Command.
Syntax SOURce[1|2]:APPLy?
Return Parameter <string> Function, frequency, amplitude, offset
Example SOUR1:APPL?
SIN +5.000000003,+3.0000E+00,-2.50E+00
Returns a string with the current function and parameters,
Sine, 5kHz, 3 Vpp, -2.5V offset.
8-7. Output Commands
Unlike the Apply commands, the Output commands are low level commands to
program the function generator.
This section describes the low-level commands used to program the function
generator. Although the APPLy command provides the most straightforward
method to program the function generator, the low-level commands give you
more flexibility to change individual parameters.