TEXIO FGX-2220, Инструкция по эксплуатации

Страница: 197 / 229

184
8-15-8. SOURce[1|2]:BURSt:TRIGger:DELay
Set
Query
Description The DELay command is used to insert a delay (in seconds)
before a burst is output. The delay starts after a trigger is
received. The default delay is 0 seconds.
Syntax SOURce[1|2]: BURSt:TRIGger:DELay
{<seconds>|MINimum|MAXimum}
Parameter <seconds> 0~655350 nS
Example SOUR1:BURS:TRIG:DEL +1.0000E+01
Sets the trigger delay to 10 seconds.
Query Syntax SOURce[1|2]:BURSt:TRIGger:DELay?
[MINimum|MAXimum]
Return Parameter <NRf> Delay in seconds
Example SOUR1:BURS:TRIG:DEL ?
+1.0000E+01
The trigger delay is 10 seconds.
8-15-9. SOURce[1|2]:BURSt:TRIGger:SLOPe
Set
Query
Description Sets or queries the trigger edge for externally triggered bursts
from the Trigger INPUT terminal on the rear panel. By default
the trigger is rising edge (Positive).
Syntax SOURce[1|2]:BURSt:TRIGger:SLOPe
{POSitive|NEGative}
Parameter POSitive rising edge
NEGative falling edge
Example SOUR1:BURS:TRIG:SLOP NEG
Sets the trigger slope to negative.
Query Syntax SOURce[1|2]:BURSt:TRIGger:SLOPe?
Return Parameter POS rising edge
NEG falling edge