manualshive.com logo in svg

Texas Instruments TMS320VC5509, Справочное руководство, Страница: 75 / 285

Поделиться
Скачать
Texas Instruments TMS320VC5509 Скачать руководство пользователя страница 75

Channels, Blocks, and Partitions

Multichannel Selection Modes

5-2

SPRU592E

5.1 Channels, Blocks, and Partitions

A McBSP 

channel

 is a time slot for shifting in/out the bits of one serial word.

Each McBSP supports up to 128 channels for reception and 128 channels for
transmission.

In the receiver and in the transmitter, the 128 available channels are divided
into eight 

blocks 

that each contain 16 contiguous channels:

Block 0: Channels 0–15

Block 1: Channels 16–31

Block 2: Channels 32–47

Block 3: Channels 48–63

Block 4: Channels 64–79

Block 5: Channels 80–95

Block 6: Channels 96–111

Block 7: Channels 112–127

The blocks are assigned to 

partitions

 according to the selected partition

mode. In the 2-partition mode, you assign one even-numbered block (0, 2, 4,
or 6) to partition A and one odd-numbered block (1, 3, 5, or 7) to partition B.
In the 8-partition mode, blocks 0 through 7 are automatically assigned to
partitions, A through H, respectively.

The number of partitions for reception and the number of partitions for
transmission are independent. For example, it is possible to use 2 receive
partitions (A and B) and 8 transmit partitions (A–H).

Содержание TMS320VC5509






























































































































































































































































































Отзывы:

Нет отзывов