Telos Zephyr, Руководство пользователя

Страница: 72 / 258

Section 4 INSTALLATION & BASIC OPERATION
72
Your second call could be to our test line. It is set for Layer 3 DUAL/MONO transmit. It
may be called by a mono or a stereo unit, at either 56 or 64kbps set to L3 Mono Rcv
(only one call required) or L3 Stereo Rcv (both calls must be made) at 32kHz sample
rate.
The numbers are:
+1 216 781.9310
+1 216 781.9311
If you are able to call locally, but are unable to connect a long- distance call, you may
want to try another long distance carrier. Just as with voice lines, you may choose a
carrier on a per- call basis by prefixing the number with the 10XXX carrier selection
code.
Some carriers and codes that we’ve tried are:
❑
AT&T 10288
❑
MCI 10222
❑
Sprint 10333
You must dial the full number, including the 1 or 011 + country code following the
prefix.
If none of the foregoing helps, see section 5 (ISDN), section 8 (Detailed Menu
Reference), and section 10 (Advanced Problem Solving).
Dropping The Connection
To release the connection, press the <DROP> button.
Drop: [ BOTH LINES ]
<NO> or <DROP>
Zephyr tries to guess whether you want to drop one line or both, depending upon the
Xmt and Rcv modes. In this case, the modes are Stereo, and
BOTH LINES
has been
selected for you. If this is OK, just press the < DROP > button again to go ahead and do it.
If you wanted to be selective, you could have chosen
LINE 1
or
LINE 2
for the Drop
parameter before pressing the < DROP > button the by pressing the < NO - >botton.
IMPORTANT!
Be sure both lines are dropped, indicated by both Line lights
being extinguished. Phone charges can add up quickly on long
distance calls!