manualshive.com logo in svg

Telos Zephyr, Руководство пользователя

Поделиться
Скачать
Telos Zephyr Скачать руководство пользователя страница 194

      

Section 10    ADVANCED PROBLEM SOLVING 

194

Cause No. 47 - Resource unavailable

This cause is used to report a resource unavailable event only when no other cause in
the resource unavailable class applies.

Cause No. 50 - Requested facility not subscribed

This cause is used to report that the cannot use this feature because s/he has not
subscribed to it.

Cause No. 51 - Bearer capability incompatible with service request

This cause indicates a user request for action was rejected because the action was
incompatible with the capability of the call.

Cause No. 53 - Service operation violated

This cause indicates the caller has violated the service operation

Cause No. 57 - Data/voice not auth./Bearer capability not

authorized

This cause indicates that the user has requested a bearer capability which is
implemented by the equipment which generated this cause but the user is not
authorized to use it. This is a common problem caused by wrong Telco provisioning of
the line at the time of installation.

Cause No. 65 - Incompatible bearcap

This cause indicates that the equipment sending this cause does not support the bearer
capability requested.

Cause No. 69 - Request facility not implemented

This cause indicates that the network (or node) does not support the request bearer
capability

Cause No. 70 - Restricted only

This cause indicates that the calling party has requested an unrestricted bearer service
but the equipment sending this cause only supports the restricted version of the
requested bearer capability.

Cause No. 81 - Invalid call reference value

This cause indicates the equipment sending this cause received a message with a call
reference that is not in use on the user interface.

Cause No. 88 - Incompatible dest.

This cause indicates that the equipment sending this cause has received a request to
establish a call which has low layer compatibility, high layer compatibility or other
compatibility attributes (e.g. data rate, DN subaddress) which cannot be
accommodated.

Содержание Zephyr



































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды