Teledyne 6 RU Chassis, Руководство по эксплуатации

Страница: 45 / 172

6 RU SSPA Chassis Operations Manual 202058 REV AA 45
2.3.4 Fault Monitoring Setup Sub-Menu
This menu, shown in
Figure 2-14
, allows the user to select how the SSPA will handle
fault conditions.
2.3.4.1 BUC Fault
Allows the operator to select the Action and Fault Logic for fault conditions associated
with the unit’s Block Up Converter. The operator can select the following Actions:
1.Fault
;
2.Alert
;
3.Fault + Mute
; or
4.Ignore
. The following Fault Logic parameters are
available:
1.High (BUC)
; or
2.Low
.
2.3.4.2 Auxiliary Faults
Allows the operator to select the Action and Fault Logic for fault conditions associated
with the Auxiliary connections. The operator can select from the following Actions:
1.Fault (AUX)
;
2.Alert
;
3.Fault + Mute
;
4.Alert + Mute
; or
5.Ignore
. The following
Fault Logic parameters are available:
1.High (AUX)
; or
2. Low
.
See
Section 2.1.2.7.1
for a description of how to mute the amplifier using the
4.Alert +
Mute
option.
Figure 2-14: Fault Monitoring Setup Sub-Menu
2.Com Setup 1.Sys Info 3.Operation 4.Flt. Setup 5.Options
1.BUC Fault
Main Menu
6.Redundancy
2. Aux. Faults 3. RFSw Faults 4.Fault Latch
1.Latch Enb. 2.Latch Dis.
5.Fwd RF / ALC
1.Fault 4.Ignore (RFSW) 3.Mute on Switch 2.Alert
1.Disable 3.High RF 4.ALC On 2.Low RF
1.Action (BUC) 2.Logic (BUC)
1.Fault (BUC) 4.Ignore 3.Fault+Mute 2.Alert
1.High (BUC) 2.Low
1.Action (AUX) 2.Logic (AUX)
1.Fault (AUX) 5.Ignore 3.Fault+Mute 2.Alert
1.High (AUX) 2.Low
5.Set Level
1.RF Level (dBm)
MENU ITEM
NOT ACTIVE
UNDER N+1 OPERATION
4.Alert+Mute 6.Back
1.Fault 3.Back 2.Alert
1.Fault (High RF) 3.Alert 2.Fault + Mute 4.Back