Teledyne 6 RU Chassis, Руководство по эксплуатации

Страница: 25 / 172

6 RU SSPA Chassis Operations Manual 202058 REV AA 25
2.3 Menus
Figure 2-9
shows the Front Panel Display Menu Structure hierarchy. There are six
main levels of menu selections.
•
Sys.Info - System Information menu sublevel (See
Section 2.3.1
)
•
Com.Setup - Serial Communication related settings (See
Section 2.3.2
)
•
Operation Setup - System operation related settings (See
Section 2.3.3
)
•
Fault Monitoring Setup - Fault handling settings (See
Section 2.3.4
)
•
Options - Backup/restore and password settings (See
Section 2.3.5
)
•
Redundancy - Switching and standby settings (See
Section 2.3.6
)
The menu tree is accessed by pressing the Main Menu key on the front panel of the
SSPA. Navigation through the menu structure is handled by using the
Up Arrow
[ ▲ ],
Down Arrow
[ ▼ ],
Left Arrow
[ ◄ ], and
Right Arrow
[ ► ] keys and the
Enter
key to
select from the items shown in the front panel display.
For menus where an actual numerical value must be entered, the
Up Arrow
[ ▲ ] and
Down Arrow
[ ▼ ] keys change the number by factors of 10; the
Left Arrow
[ ◄ ] and
Right Arrow
[ ► ] keys change the number in increments of 1.
Note
: If the Local/Remote key is toggled so that the Remote LED is illu-
minated, the Main Menu key, Arrow keys and Enter key are disabled. To
regain local control, press the Local/Remote key so that the Local LED is
illuminated.
Figure 2-9: Front Panel Menu Structure
2.Com Setup 1.Sys Info 3.Operation 4.Flt. Setup 5.Options
Main Menu
6.Redundancy
To Sys Info Page 1