Teledyne 6 RU Chassis, Руководство по эксплуатации

Страница: 43 / 172

6 RU SSPA Chassis Operations Manual 202058 REV AA 43
2.3.3 Operation Setup Sub-Menu
This menu, shown in
Figure 2-13
, allows the user to select system-specific options.
2.3.3.1 Info
Shows the current firmware version. See
Figure 2-10
and
Section 2.3.1.12
through
Section 2.3.1.15
.
2.3.3.2 Buzzer
Toggles the audible alarm buzzer on/off. Factory default is Enabled.
2.3.3.3 Mute
Allows user to Set or Clear the Mute status for the unit. Muting the amplifier via remote
M&C requires 70 msec maximum (30 msec typical).
2.3.3.4 Sys. Mode
Selects the logical state machine used by the controller. Available choices are:
•
Standalone
– Select this option for standalone SSPA application. All RF
waveguide switch controls are disabled;
•
1:1 Mode
– Select this option for classic internal 1:1 redundancy applica-
tion. For proper function, a second SSPA is required and also needs to
be configured for the same operation mode. Other settings may need to
be selected; see
Section 5.0
for details;
•
1:2 Mode
– This setting is used for the internal 1:2 redundancy operation
schema. See
Section 6.0
for operation details;
•
1:1 PhComb
– Used for hybrid 1:1 phase combined operation. Use of
N+1 controls in conjunction is highly recommended. See
Section 7.0
;
Figure 2-13: Operation Setup Sub-Menu
2.Com Setup 1.Sys Info
2.Buzzer
3.Operation 4.Flt. Setup 5.Options
1.Info
Main Menu
6.Redundancy
3.Mute 4.Sys.Mode 5.Attenuation 6.RF Units
1.StdAlone
0.0 .. 20.0 dB
2. 1:1 Mode 1.Buzzer On 2.Buzzer Off
1.Mute On 2.Mute Off
3. 1:2 Mode
1.dBms 2. Watts To SSPA Firmware Info Page
4.1:1 PhComb 5.1:2 PhComb 6.SinglSw