Teledyne 6 RU Chassis, Руководство по эксплуатации

Страница: 145 / 172

6 RU SSPA Chassis Operations Manual 202058 REV AA 145
9.6.2.5 Configuring RM SSPA Unit to Work with SNMP Protocol
1. Set up the unit IP Address. Select the following sequence from the SSPA
Front Panel: Press the
Main Menu
key; select
2.Com.Setup
and press the
Enter
key; select
5.IP Setup
and press the
Enter
key; select
2.LocalIP
and
press the
Enter
key. Use the navigation keys to input the unit IP address.
Press the
Enter
key when complete;
2. Set up the unit Gateway Address. Select the following sequence from the
SSPA Main Menu: Press the
Main Menu
key; select
2.Com.Setup
and
press the
Enter
key; select
5.IP Setup
and press the
Enter
key; select
4.Gateway
and press the
Enter
key. Then by using the navigation keys, ad-
just the unit gateway address. If no gateway is needed, set the address to
0.0.0.0. Press the
Enter
key when complete;
3. Set up the unit Subnet Mask. Select the following sequence from the SSPA
Front Panel: Press the
Main Menu
key; select
2.Com.Setup
and press the
Enter
key; select
5.IP Setup
and press the
Enter
key; select
3.Subnet
and
press the
Enter
key. Then by using the navigation keys adjust the unit sub-
net mask. Press the
Enter
key when complete;
4. Set up the unit Community Set and Get strings. Select the following se-
quence from the SSPA Front Panel: Press the
Main Menu
key; select
2.Com.Setup
and press the
Enter
key; select
5.IP Setup
and press the
En-
ter
key; select
6.More
and press the
Enter
key; select
1.CommunitySet
(or
2.CommunityGet
) and press the
Enter
key. Then by using the navigation
keys, adjust the unit community strings information. Press and hold the key
for alphanumeric selections. Press the
Enter
key when complete. Press and
hold the
Down Arrow
[ ▼ ] key and then press the
Up Arrow
[ ▲ ] key to
erase unwanted characters;
5. Set up the unit interface to SNMP. Select the following sequence from the
SSPA Front Panel: Press the
Main Menu
key; select
2.Com.Setup
and
press the
Enter
key; select
4.Interface
and press the
Enter
key; select
4.SNMP
and press the
Enter
key. Restart the unit by cycling power or by se-
lecting the Reset option from the front panel menu.
6. SNMP protocol now is set and ready to be used.