TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 37 / 74

DynaJet® IC7140
www.teejet.com
36
1
2
3
4
5
6
7
8
9
A
UT Data Diagnostics
Provides information regarding the universal terminal.
•
UT and ECU Address – the address the UT has acquired on the
BUS
•
Part 6 Version and Status
•
Softkey Size – displays softkey size in pixels
•
Virtual Number – the total number of possible softkeys.
•
Physical Number – number of softkeys able to be shown at one
time in the side menu
•
Font – define Small, Large, and Attributes
•
Colour – indicates the colour scheme used on the system
•
HW – hardware
•
Datamask Size – indicates the screen size in pixels
Figure 5-22: UT Data Diagnostics
Use these softkeys to change UTs or delete object pools:
Next UT – Press to switch between terminals/controllers
when more than one is used.
Delete Object Pools – Press to delete saved information
on the UT and force the UT to upload all information from
the controller on the next power cycle.
Gyroscope Diagnostics
Provides information regarding the gyroscope.
•
Orientation
−
Horizontal, Label Up
−
Horizontal, Label Down
−
Vertical, Connectors Up
−
Vertical, Connectors Down
−
Vertical, Left Edge Up
−
Vertical, Right Edge Up
•
X Angle/Pitch - This is the front to back rotation of the
DynaJet IC7140 ECU as compared to the vehicle. How many
degrees it must be rotated from the Base Orientation position
[X: Front, Y: Right] to match the actual orientation on the vehicle.
•
Y Angle/Roll - This is the side to side rotation of the
DynaJet IC7140 ECU as compared to the vehicle. How many
degrees it must be rotated from the Base Orientation position
[X: Front, Y: Right] to match the actual orientation on the vehicle.
•
Z Angle/Yaw - This is the rotation of the DynaJet IC7140 ECU
compared to the vehicle looking down from the top. How many
degrees it must be rotated from the Base Orientation position
[X: Front, Y: Right] to match the actual orientation on the vehicle.
Figure 5-23: Gyroscope Diagnostics