TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 59 / 74

DynaJet® IC7140
www.teejet.com
58
1
2
3
4
5
6
7
8
9
A
Alert
Code Error Description Action
3008 Solenoid Current Too Low Solenoid current is below the low current limit. Go to SYSTEM OVERVIEW for
details
3009 Missing Pressure Sensor Pressure sensor is not detected. Pressure sensor is
required for Operation Mode.
3010 Missing Boom Interface Module Communication to the Boom Interface Module has been
lost. Boom Interface Module is required for Operation
Mode.
3011 Missing IOM Pressure Sensor Communication to the Input Output Module (IOM) Pressure
Sensor has been lost. IOM Pressure Sensor is required for
Operation Mode
3012 Missing Driver(s) Communication to a driver or drivers has been lost. All
drivers are required for Operation Mode. Go to SYSTEM OVERVIEW for
details
3015 Minimum Duty Cycle Reached Desired pressure is not being maintained by the system.
The control duty cycle has fallen to the minimum threshold.
3016 Above Maximum Duty Cycle Desired pressure is not being maintained by the system.
The control duty cycle has risen above the maximum
threshold.
3017 Above High Pressure System pressure is above the high pressure alarm value.
The duty cycle has reached the maximum and pressure is
still too high.
3018 Outside Droplet Size Droplet size is not being maintained by the system.
3019 Above High Pressure System pressure is above the high pressure alarm value.
3020 Below Low Pressure Nozzle pressure is below the recommended nozzle
pressure range.
3021 Above High Pressure Nozzle pressure is above the recommended nozzle
pressure range.
3022 Boom Setup Error Number of implement nozzles and flow regulator nozzles
are mismatched. Go to Main Menu-> Machine Setup
for details.
3028 At Initialisation, the following errors
may have occurred:
•
3002 Missing Start Terminator
•
3003 Missing End Terminator
•
3009 Missing Pressure Sensor
•
3022 Boom Setup Error
At least one or more initialisation errors has occurred.
NOTE: This alert replaces the above pop-ups ONLY at
Initialisation.
Review alerts on the Home screen
and/or System Overview for details
on the error(s). Once all errors have
been addressed, restart the system.
When an 8-ouput driver is installed,
see Initialsation Boom Setup Error
with 8-output Drivers for more
details.
3029 Operation Error: All Solenoids
Open An issue on the system has occurred preventing access to
the Operation screen. To avoid additional issues, all
Solenoids have been opened. Please stop application and address
the operation issue.