TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 8 / 74

DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
1
2
3
4
5
6
7
8
9
A
7
ECU Orientation
The DynaJet IC7140 ECU needs to know which orientation it is
mounted, or the system will not work properly. Note the direction of
the ECU label, connections, and left/right edges in relation to the
forward facing direction of the vehicle. The view will always be as if
the operator is looking down from the top of the cab.
•
The DynaJet IC7140 ECU must be mounted securely to a
surface that is firmly mounted to the vehicle and moves in
unison with the GNSS antenna.
•
During DynaJet IC7140 console setup in Main-> OEM Settings
the orientation of the DynaJet IC7140 ECU must be accurately
specified in “ECU Orientation”.
Orthogonal Orientations
The DynaJet IC7140 ECU is to be mounted orthogonally on the
vehicle. This means that the DynaJet IC7140 ECU is at a 90° angle or
some multiple of 90 (0, 90, 180, 270) degrees at all three axes
(vertically, horizontally, and perpendicular to the other two) when
compared to the direction of travel of the vehicle.
Select one of the six (6) possible orthogonal orientations at which the
DynaJet IC7140 ECU is installed.
◄
Horizontal, Label Up (default installation position)
◄
Horizontal, Label Down
◄
Vertical, Connectors Up
◄
Vertical, Connectors Down
◄
Vertical, Left Edge Up
◄
Vertical, Right Edge Up
Figure 1-3: Orthogonal Orientations as Compared to Vehicle Orientation
Orthogonal orientation is as if looking down at the ECU from above.
Horizontal,
Label Up
Horizontal,
Label Down
Vertical, Connectors
Up
Vertical, Connectors
Down
Vertical,
Left Edge Up
Vertical,
Right Edge Up
Default Installation
Position
Caution – “Vertical, Connection Up” should only be
used when no other orientations are available.