TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 44 / 74

DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
1
2
3
4
5
6
7
8
9
A
43
CONTROL ERRORS & ALERTS
If there is an active control error, the value background will be will red
to indicate the error. The specific error will be specified on the pop-up
alert screen.
Control alerts will clear themselves when the control has returned to
operational range
Errors with control levels are displayed graphically on the Active
Information bar to help the operator stay alert of any problems.
NOTE: System Component errors appear on the System Overview
screen. See the SYSTEM OVERVIEW chapter for details.
•
Current Droplet Size – Droplet size is not being maintained by
the system or Nozzle pressure is above/below the
recommended nozzle pressure range
•
PWM Duty Cycle – Desired pressure is not being maintained by
the system
•
Current Boom Pressure – System pressure is above the high
pressure alarm value
Figure 6-13: Control Error Example
Pop-up Alert Screens
If there is an active error, an alert screen will appear providing specific
information and associated error code.
See " Appendix B – TROUBLESHOOTING GUIDE -> Alert Overview"
for details on specific errors.
Figure 6-14: System Alert Example
NON-TOUCHSCREEN UT OPTIONS
When using a UT that does not have a touchscreen, screen options
will be available as additional softkeys not illustrated in the examples
in this manual. Use these softkeys to navigate through the options:
Operation Modes
To Adjustable Droplet Mode – Press to change
operation mode to adjustable droplet mode
To Droplet Mode – Press to change operation mode to
droplet (automatic) mode
To Manual Mode – Press to change operation mode to
manual (PWM) mode
Nozzle Favourites
Nozzle Favourites – Press to go to the Nozzle Favourites
screen
Figure 6-15: Non-Touchscreen UT Options