DynaJet® IC7140
98-05347-EN-R1_A4LT-DynaJetIC7140-UM.docx
1
2
3
4
5
6
7
8
9
A
9
Figure 1-4:
DynaJet IC7140 Hybrid System Diagram
Component Installation Instructions
Power Source
Power must be sourced from the battery using a
(18)
60 amp fused battery cable [45-05943] which connects to a
(17)
6 gauge power cable [45-05942-
xx] to connect to the
(16)
Power Distribution Module [78-05121-xx].
Power must be routed from the
(16)
Power Distribution Module [78-05121-xx] to each
(13)
Nozzle harness [45-04005-xx-xx] (which connects to each
(12)
DynaJet IC7140 driver [78-05124]) using a
(14)
Power Extension Driver cable [45-05971-xx],
(15)
Driver Power “Y” cable [45-05997-xx] and/or
(11)
Power Adapter cable [45-05998-xx].
Drivers Modules and Terminators
There will be one
(12)
DynaJet IC7140 Driver [78-05124] per eight (8) nozzles.
•
Mount each DynaJet IC7140 driver centered within the eight (8) nozzles it controls.
The
(9)
Start Terminator 45-04006-START must be connected to the DynaJet IC7140 driver 78-05124 for section 1.
The
(8)
End Terminator 45-04006-END must be connected to the Driver module 78-05124 for the last section.
Nozzle Harnesses
When installing
(13)
Nozzle Harnesses [45-04005-xx-xx] always start with section 1 and continue to the last section, working left to right (while facing in
the machine’s forward direction
Nozzle harnesses are designed for your specific nozzle spacing.
CAN Cables
(7)
CAN cables [45-04006-xx] must be connected in series between each
(13)
Nozzle harness [45-04005-xx-xx] through the
(2-1)
DynaJet ECU
Harness.
Содержание DYNAJET IC7 140
Страница 1: ...DYNAJET IC7140 INSTALLATION SETUP USER MANUAL 98 05347 R1...
Страница 73: ......
