TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 9 / 74

DynaJet® IC7140
www.teejet.com
8
1
2
3
4
5
6
7
8
9
A
COMPONENT INSTALLATION
DynaJet IC7140 installation includes eight (8) output driver options where each driver consists of eight (8) nozzle harnesses and is tailored to the
customer’s specific equipment. The following is general installation information. Specific instructions will be based on selected components and will be
tailored to the machine.
Installation System Components
Item Part Number Description
1
DM-01 DynaJet IC7140 ECU Module
2-1
Number dependent on components DynaJet ECU Harness
2-2
50-05222 18 Position Cinch Dust Cap
3 16-05015 Pressure Sensor
4 45-
05887: 3′ / 1 m
45-
05886: 25′ / 7.5
m
Pressure Sensor Cable (only required with 45-10207 DynaJet Hybrid ECU Harness)
5 78-05137 Pressure Interface (only required with 45-10207 DynaJet Hybrid ECU Harness)
6
45-10195 Boom Interface Module (BIM) Hybrid Harness
7
45-04006-
03: 3′ / 1 m
45-04006-
07: 7′ / 2 m
45-04006-
13: 13′ / 4 m
45-04006-
20: 20′ / 6 m
CAN Extension Cable
8 45-04006-END CAN Terminator-END
9 45-04006-START CAN Terminator-START
10
78-05091, up to 15 sections (1-15)
78-05128, up to 30 sections (16-30) Boom Interface Module (BIM)
11 45-05998-xx Power Adapter
12 78-05124 DynaJet HF Driver
13 45-04005-xx-xx Nozzle Harness
14
45-05971 Power Extension Driver
15 45-05997-15 Driver Power “Y” Cable
16 78-05121-xx Power Distribution Module (PDM)
17 45-05942-xx Power Cable, 6 gauge
18
45-05943 Battery Cable, 60 amp Fused
19
45-04001-xx Nozzle Extension