TeeJet Technologies DYNAJET IC7 140, Руководство пользователя

Страница: 6 / 74

SAFETY INFORMATION TEEJET TECHNOLOGIES
98-01556-EN-R0_A4LT-SafetyNotices_INSERT.docx
2
•
Filters can only be opened when the manual valves in front of and behind the filter are in closed position. If any appliance has
to be taken out of the piping, manual valves in front of and behind this appliance have to be in closed position. If they are
reinstalled, make sure that this happens correctly, that this apparatus is well aligned, and that all connections are tight.
•
The plumbing supply to the equipment should meet all company and local regulations and must be properly routed and
connected to the equipment. All connections must meet the specified requirements.
•
It is advised to drain and purge the liquid train when the equipment shall not be used for a longer period of time.
WARNING! AUTO STEERING SAFETY
•
To prevent serious personal injury or death from being run over by the vehicle or automated motion of the steering system,
never leave the vehicles operator seat with the system engaged.
•
To prevent serious personal injury or death from being run over by the vehicle or automated motion of the steering system,
verify the area around the vehicle is clear of people or obstacles before startup, calibration, tuning or engaging the system.
•
Make sure equipment is tightly secured to the proper components.
•
Never drive on public roads with system engaged.
CAUTION! EQUIPMENT SAFETY, MAINTENANCE, AND SERVICE
•
The equipment should be operated only by properly trained, qualified personnel. They must have proven their skills in the
operation of the equipment.
•
Before using the equipment, the operator has to check if the equipment is in good condition and can be used safely. If not,
the equipment cannot be used.
•
All necessary PPE must be readily available to the operator at all times.
•
Routinely check the system and components for wear and damage. Replace or repair when necessary.
•
Only qualified authorised experts are allowed to repair or maintain the installation. The maintenance and operating
instructions shall be rigidly observed and followed.
•
A complete manual for the equipment must be available to the operator or maintenance technician at all times.
CAUTION! HARNESS CABLE AND HOSE SAFETY
•
Routinely check all harness cables and hoses for damage or wear. Replace or repair when necessary.
•
Do not route harness cables and hoses with sharp bends.
•
Do not strap harness cables and hoses to lines with high vibration or spikes in pressure.
•
Do not strap harness cables and hoses to lines transporting hot fluids.
•
Protect harness cables and hoses from sharp objects, equipment debris, and material buildup.
•
Allow sufficient length for harness cables and hoses to have free movement on sections that move during operation, and be
sure that harness cables or hoses do not hang below the equipment.
•
Allow sufficient clearance for harness cables and hoses from implement and machine operational zones.
•
When cleaning equipment, protect harness cables from high pressure wash.
NOTE: TOUCH SCREEN CARE
•
Keep sharp objects away from the touch screen device. Touching the screen with a sharp object could result in damage to the
display.
•
Do not use harsh chemicals to clean the console/display. The correct way to clean a console/display is to use a soft damp
cloth or anti-static wipe, similar to cleaning a monitor on a computer.
NOTE: RECOMMENDED REPLACEMENT PARTS
•
The system has been designed with components that work together to provide the best system performance. When the
system requires replacement parts, only TeeJet recommended components should be used to maintain proper system
operation and safety.
English-International www.teejet.com
© TeeJet Technologies 2020